We design.Then we build.
Two integrated departments under a single technical direction: the study that sizes the structure, the site team that executes it.
Two departments, one technical direction
The design office never loses sight of the site, and the site never discovers the structure on the day of the earthworks.
Design & Engineering
A multidisciplinary team that designs, sizes and verifies the structure before the first spade hits the ground.
6 Services
Construction
Site teams that execute the designed structure, from earthworks to handover.
4 Services
Ten services, two departments
From the first calculation note to the final sign-off, this is exactly what we do.
01Design & Engineering
Architecture & civil engineering studies
Architectural design and structural sizing in a single move, from site plan to reinforcement drawings.
Hydraulic and roadworks studies
Supply, sewerage and road networks sized on real flows, not on averages.
Descriptive statement of division
Legal and technical division of a building into lots, with shares based on verified areas.
Fire safety plans — hotels and public buildings
Compliant safety files for buildings open to the public, through to the safety commission.
Site supervision
An engineer on site to verify that what is built is what was designed.
Technical and economic studies
Compare construction options before committing, with figures to back it up.
02Construction
Concrete construction
Reinforced concrete structures, from raft to parapet, poured to the design office's execution drawings.
Steel construction
Steel frames and industrial buildings, from workshop to on-site erection.
Hydraulic construction
Reservoirs, stations and networks built to the watertightness standard water structures demand.
Earthworks and demolition
Platform preparation, cut and fill, and controlled demolition.
A working sequence, not a promise
Every project follows the same frame: understand the site, size the structure, price the solution, build and hand over.
Survey and diagnosis
Site visit, topographic survey, soil constraints, applicable regulations and the client's programme.
Design and sizing
Architectural drawings, structural, hydraulic and roadworks calculation notes, regulatory compliance checks.
Technical and cost study
Quantities, detailed specifications, budget estimate and arbitration between construction options.
Execution and handover
Site setup, execution by our own teams, quality control and handover of compliant works.
What our clients say
“One team for both study and site: execution adaptations were settled in 48 hours instead of several weeks.”
“The fire safety file was approved by the commission without major reservation. The preparatory work made the difference.”
“The reservoir passed its filling test first time. On this type of structure, that is the only indicator that counts.”
Two complementary departments
A multidisciplinary team that designs, sizes and verifies the structure before the first spade hits the ground.
Site teams that execute the designed structure, from earthworks to handover.
What clients ask us
Address
06, Lot F Boudjemaa Temime, Draria, Algiers
Yes. The Design & Engineering department works for clients who entrust execution to another contractor. Site supervision then remains available as an option.
Yes, provided we can verify the calculation notes and execution drawings supplied before starting. That verification is part of our responsibility commitment.
We work mainly in Algiers, Blida, Tipaza, Boumerdès, Médéa and Bouira. Other wilayas are possible depending on the nature and duration of the operation.
For a standard operation, a preliminary estimate is issued within one to two weeks after the site visit and receipt of the programme.
Yes: building permits, descriptive statements of division and fire safety files for public buildings are part of our design services.
Let's talk about your project
- Phone+213 553 28 12 73
- Emailcontact@bouatco.com
- Address06, Lot F Boudjemaa Temime, Draria, Algiers
- Opening hoursSunday – Thursday, 8:30 – 17:00
